Medical T-branch Connectors
1. SJ Group started medical business since 2013. We not only offer injection mold but also product and assembly.
2. Build 2 and 4 cavity T-Branch mold, the most important is making sure the part can run contiously and smmothly. But the small inner hole is very difficult to control, it is only 0.6mm. Normally we'll prepare some spare parts to replace once the pins are broken during mass production.
- Fast Delievery
- Quality Assurance
- 24/7 Customer Service
Product Introduction
Product Description
Customized according to your needs
Part Name | T-Branch connector injection mold |
Part Size | 68×29×8mm |
Part Weight | 3.16gg |
Resin | PC |
Cavity | 1×4 Cavity Mold |
Hot runner | 4 Drop Husky with Hot Tip |
Cycle Time | 48s |
Successful Experience
34 years focusing in plastic injection molds
SJ Group made varied types of T-Branch injection mold for different customer like Abbott. We cooperated with them since 2014. Abbott audited our plant every year. We built copy molds for the same part to meet the production volume. So we've accumulated rich experience on this kind of part. All of the part run in class 8 clean room as per ISO13485. We always put the quality at the first place. So stable quality is our core competitiveness. Our purpose is zero defect.
Class 8 Clean Room
Promise the quality
Class 8 clean room with 89 sets high precision injection machines. All the injection machines were imported from Japan. The brands cover Sumitomo, Toshiba, Fanuc, TOYO etc. Our factory was according to ISO13485 certified.
Hot Tags: medical t-branch connectors, China, suppliers, manufacturers, factory, customized, made in China
