Rotor Injection Tool
1：68.65 measurement control is strict, Bottom areas with carbon is movable during injection. It shrinks, so the measurement control is very hard, mainly is instability.
2：Bottom areas with carbon is fragile; It will be damaged if touching mold too much or with too much injection pressure.
3：it should be highly controlled for manufacturing accuracy. The metal parts shut off cavity holes, it is easy to have shut off burning issue, it is also easy to damage cavity or metal parts.
4：Cavity and core shut off each other and cavity shut off areas need to seal, it requires high manufacturing and measurement accuracy.
- Fast Delievery
- Quality Assurance
- 24/7 Customer Service
Product Introduction
Product Description
Customized according to your needs
Part Name | Rotor outside tooling |
Part Size | 77.5*28*28 |
Part Weight | 20g |
Resin | POM+25%GF |
Cavity | 4 |
Hot runner | 12 drops heitec open gate |
Cycle Time | 25s |
Successful Experience
34 years focusing in plastic injection molds
Positive feedback from customers
We won continuously praise from our customers because of the good cooperation.
FAQ
Find your answers in common asked questions
Q: What about the lead time for this project?
A: From the order to the mold shipment it took 10 weeks. Mold design 2 weeks, mold manufacturing 6 weeks, mold trials and improvements 2 weeks.
Q: Did you have any problems with this project? How did you solve the problems?
A: Yes, we met problems by the mold trial. The bottom area with carbon is very easy to break. So we had to be very careful by the molding process.
Q: Which kind of steel do you use for the mold inserts, slides and lifters?
A: We usually use 1.2344, 1.2767 or H13 for the cavity and core, inserts, slides and lifters.
Hot Tags: rotor injection tool, China, suppliers, manufacturers, factory, customized, made in China
