Home / Main Business / Plastic Injection Mold / Medical Injection Molds / Content

Main Business

Dialysis Shell Plastic Injection Moulds

1. The most important for this dialyzer shell mold is the eccentricity. We can control it within 0.1mm.
2. It is easy to have step, this will influence the part function. So we need to control the manufacture accuracy.
3. We can make different kind of resin like PC, PP. PP will save cost greatly.
4. All of component mold of the dialyzer assembly can be built by us.

Send Inquiry

Fast Delievery
Quality Assurance
24/7 Customer Service

Product Introduction

Product Description

Customized according to your needs

Part Name	Dialyzer shell injection mold
Part Size	Φ60x 260 mm(Φ38.5)
Part Weight	81.2g
Resin	PC-RX2430
Cavity	1×2 Cavity Mold
Hot runner	2 Drop valve gate
Cycle Time	30s

Successful Experience

34 years focusing in plastic injection molds

The part is used in Hemodialysis for uremia. Normally this kind of mold is purchased in Japan. Few Chinese mold maker is able to make this high precision mold. But we built it in 2013 successfully. The eccentricity what we achieved is 0.1mm. Right now the mold is still running smoothly in customer's plant. After that we built several copy dialyzer shell mold and keep continue to improve the mold structure. The cycle time what we reach is 30 seconds.

We offer pre-sales services for free

In order to help our customers to win a new project, we can offer strong technical support for our clients. For example, we can do DFM and Mold flow analysis before the customer place the order to us.

The DFM Report helps to analyze the parting line, gate position, the layout of ejector pins, draft angle, wall thickness and other part issues.

A Mold Flow Report helps to analyze sink marks, weld lines, air traps, deflection and other molding issues.

4-1